SV Mini Controller Replacement Guide

 RISK OF ELECTRIC SHOCK – Ensure mains power is turned OFF at both the isolator switch and circuit breaker / RCD.

Repairs must be carried out by a qualified technician.

1. Undo the four screws and remove the front cover from the SV Mini controller.

2. Make note of all connections and mark cables if required before disconnecting from the original controller. Then copy the DIP Switch configuration from the original controller and reconnect all cables into their relevant sockets on new replacment unit.

3. When reconnecting the Heater sensor into the heater socket. Ensure sensor cable is routed downwards and goes to the bottom groove.

4. Place the outer cover back on the SV Mini controller and reset the power to the spa.